Started Sealing up the firewall


The firewall had lots of soft rubber like soundproofing glued on so it took me a while to scrape it off there. I also whent ahead and took the steering column and pedals out to make it easier to work in the car. I got one side mostly finished today. I need to do the drivers side and the rust holes in the fender well. I will probably do the fender well parts from the outside to keep any crevices from rusting out hopefully. The rest of the inner fender will be plastic but I figure the interior might need more protection from flying rocks so it is staying metal.

You can see where the new floor will be at. The 3/4 square tubing going across the bottom of the firewall is what I will be putting the floor on top of. The entire floor will be flat and level with the door sills. This will give me plenty of room for the air ducting through the car.